Fabrication of n-type carbon nanotube field-effect transistors by Al doping

We report the effect of an Al layer, covering the central part of the nanotube channel, on the electrical transport properties of carbon nanotube field-effect transistors (CNFETs). The CNFETs, consisting of single-walled carbon nanotube or double-walled carbon nanotube between two Pd electrodes on top of Si O2 layer, which showed p -type or ambipolar transport behaviors, exhibit clear n -type characteristics after the Al deposition. We ascribe such conversions into n -type behaviors to the electron doping in the Al-covered nanotube region, which results in the bending of the nanotube bands nearby the edges of the Al layer. This technique, Al deposition under a high vacuum, may give rise to a practical fabrication method for the n -type CNFET, which may enable us to develop complementary logic nanotube electronic devices.open151

Measurement of the velocities in the transient acceleration process using all-fiber photonic Doppler velocimetry

Based on analysis of basic photonic Doppler velocimetry (PDV), a formula to measure velocity variation in a single cycle is put forward. PDV has been improved in three aspects, namely, the laser, the detector and the data processing. A measurement system for velocity of the initial stage of a shock motion has been demonstrated. Instantaneous velocity measurements have been performed. The experimental results have a good agreement with the values obtained from the accelerometer. Compared with the traditional fringe method, the proposed method in this paper can identify instantaneous velocity variation. So it is particularly suitable for measuring the velocity in the transient acceleration process of shock waves and detonation waves

Kidney disease in lupus is not always 'lupus nephritis'

In lupus erythematosus, elevated serum creatinine levels and urinary abnormalities implicate a kidney disorder, which may not always be lupus nephritis as defined by the current classification of the International Society of Nephrology/Renal Pathology Society. The signs of renal dysfunction may be caused by lupusunrelated renal injury such as drug toxicity or infection or by lupus-associated mechanisms that are not part of the classification, such as minimal change nephrotic syndrome or thrombotic microangiopathy. The latter seems to complicate lupus nephritis more frequently than previously thought. An unbiased assessment of kidney disease in lupus requires a kidney (re-)biopsy to define the appropriate management

Localized-Surface-Plasmon Enhanced the 357 nm Forward Emission from ZnMgO Films Capped by Pt Nanoparticles

The Pt nanoparticles (NPs), which posses the wider tunable localized-surface-plasmon (LSP) energy varying from deep ultraviolet to visible region depending on their morphology, were prepared by annealing Pt thin films with different initial mass-thicknesses. A sixfold enhancement of the 357 nm forward emission of ZnMgO was observed after capping with Pt NPs, which is due to the resonance coupling between the LSP of Pt NPs and the band-gap emission of ZnMgO. The other factors affecting the ultraviolet emission of ZnMgO, such as emission from Pt itself and light multi-scattering at the interface, were also discussed. These results indicate that Pt NPs can be used to enhance the ultraviolet emission through the LSP coupling for various wide band-gap semiconductors

Design Rules for Self-Assembly of 2D Nanocrystal/Metal-Organic Framework Superstructures.

We demonstrate the guiding principles behind simple two dimensional self-assembly of MOF nanoparticles (NPs) and oleic acid capped iron oxide (Fe3 O4 ) NCs into a uniform two-dimensional bi-layered superstructure. This self-assembly process can be controlled by the energy of ligand-ligand interactions between surface ligands on Fe3 O4 NCs and Zr6 O4 (OH)4 (fumarate)6 MOF NPs. Scanning transmission electron microscopy (TEM)/energy-dispersive X-ray spectroscopy and TEM tomography confirm the hierarchical co-assembly of Fe3 O4 NCs with MOF NPs as ligand energies are manipulated to promote facile diffusion of the smaller NCs. First-principles calculations and event-driven molecular dynamics simulations indicate that the observed patterns are dictated by combination of ligand-surface and ligand-ligand interactions. This study opens a new avenue for design and self-assembly of MOFs and NCs into high surface area assemblies, mimicking the structure of supported catalyst architectures, and provides a thorough fundamental understanding of the self-assembly process, which could be a guide for designing functional materials with desired structure

Femtosecond laser surface structuring of silicon with Gaussian and optical vortex beams

We report an experimental analysis of femtosecond laser induced surface structuring of silicon by exploiting both Gaussian and Optical Vortex beams. In particular, we show how different surface patterns, consisting of quasi-periodic ripples and grooves, can be obtained by using different states of polarization offered by optical vortex beams. Both for Gaussian and optical vortex beams, an increase of the number of laser pulses, N, or beam energy, E-0, leads to a progressive predominance of the grooves coverage, with ripples confined in specific regions of the irradiated area at lower fluence. The average period of ripples and grooves shows a different dependence as a function of both E-0 and N, underlying important differences in mechanisms leading to the formation of ripples and grooves. In particular, our experimental characterization allows identifying a preliminary stage of grooves generation with rudimental surface structures, preferentially directed parallel to the laser polarization. This supports the idea that one possible mechanism of grooves formation lies in the progressive aggregation of clusters of nanopartides densely decorating the ripples. Our experimental findings provide important indications on the basic understanding of the processes involved in laser surface structuring with ultrashort pulses that can guide the design of the surface patterns. (C) 2016 Elsevier B.V. All rights reserved

Digit-only sauropod pes trackways from China - evidence of swimming or a preservational phenomenon?

For more than 70 years unusual sauropod trackways have played a pivotal role in debates about the swimming ability of sauropods. Most claims that sauropods could swim have been based on manus-only or manus-dominated trackways. However none of these incomplete trackways has been entirely convincing, and most have proved to be taphonomic artifacts, either undertracks or the result of differential depth of penetration of manus and pes tracks, but otherwise showed the typical pattern of normal walking trackways. Here we report an assemblage of unusual sauropod tracks from the Lower Cretaceous Hekou Group of Gansu Province, northern China, characterized by the preservation of only the pes claw traces, that we interpret as having been left by walking, not buoyant or swimming, individuals. They are interpreted as the result of animals moving on a soft mud-silt substrate, projecting their claws deeply to register their traces on an underlying sand layer where they gained more grip during progression. Other sauropod walking trackways on the same surface with both pes and manus traces preserved, were probably left earlier on relatively firm substrates that predated the deposition of soft mud and silt . Presently, there is no convincing evidence of swimming sauropods from their trackways, which is not to say that sauropods did not swim at all

Robust and rapid algorithms facilitate large-scale whole genome sequencing downstream analysis in an integrative framework

published_or_final_versio

Surface Structuring with Polarization-Singular Femtosecond Laser Beams Generated by a q-plate

In the last few years femtosecond optical vortex beams with di erent spatial distributions of the state of polarization (e.g. azimuthal, radial, spiral, etc.) have been used to generate complex, regular surface patterns on di erent materials. Here we present an experimental investigation on direct femtosecond laser surface structuring based on a larger class of vector beams generated by means of a q-plate with topological charge q = +1/2. In fact, voltage tuning of q-plate optical retardation allows generating a family of ultrashort laser beams with a continuous spatial evolution of polarization and uence distribution in the focal plane. These beams can be thought of as a controlled coherent superposition of a Gaussian beam with uniform polarization and a vortex beam with a radial or azimuthal state of polarization. The use of this family of ultrashort laser beams in surface structuring leads to a further extension of the achievable surface patterns. The comparison of theoretical predictions of the vector beam characteristics at the focal plane and the generated surface patterns is used to rationalize the dependence of the surface structures on the local state of the laser beam, thus o ering an e ective way to either design unconventional surface structures or diagnose complex ultrashort laser beams

Colored Motifs Reveal Computational Building Blocks in the C. elegans Brain

Background: Complex networks can often be decomposed into less complex sub-networks whose structures can give hints about the functional organization of the network as a whole. However, these structural motifs can only tell one part of the functional story because in this analysis each node and edge is treated on an equal footing. In real networks, two motifs that are topologically identical but whose nodes perform very different functions will play very different roles in the network. Methodology/Principal Findings: Here, we combine structural information derived from the topology of the neuronal network of the nematode C. elegans with information about the biological function of these nodes, thus coloring nodes by function. We discover that particular colorations of motifs are significantly more abundant in the worm brain than expected by chance, and have particular computational functions that emphasize the feed-forward structure of information processing in the network, while evading feedback loops. Interneurons are strongly over-represented among the common motifs, supporting the notion that these motifs process and transduce the information from the sensor neurons towards the muscles. Some of the most common motifs identified in the search for significant colored motifs play a crucial role in the system of neurons controlling the worm's locomotion. Conclusions/Significance: The analysis of complex networks in terms of colored motifs combines two independent data sets to generate insight about these networks that cannot be obtained with either data set alone. The method is general and should allow a decomposition of any complex networks into its functional (rather than topological) motifs as long as both wiring and functional information is available